Jep21
Well-known member
Hello guys you all knw me for being obssessed with picos and nano tanks well im taking the plunge and doing something a little bit crazy.. With my new 2.5g low iron crystal clear glass finnex tank, im going to drill it with the overflow on one side and the return on the other all plumbed into a 10g sump/refugium. What got me inspired to do something like this is this tank in nano reef http://www.nano-reef.com/topic/296235-3-foot-office-nano-mr-aqua-12-gallon-long/. I knw my tank won't look as good as his but will try to my best to somewhat replicate it but in a much smaller tank..
Dimensions of the tank: 12" x 6 x 8; 5mm glass
Heres the tank so far:
Kind of what i had planned before but all changed now with plumbing it.. I will still keep that fan on the back though..
So my plan is to get a stand built to hold a chiller in the lower half of the stand and the 10g sump refugium on top
Kind of what i have planned out for this tank (sorry about my hand writing or my poor drawing skills)
The inspiration for this build:
http://www.nano-reef.com/topic/296235-3-foot-office-nano-mr-aqua-12-gallon-long/
Dimensions of the tank: 12" x 6 x 8; 5mm glass
Heres the tank so far:
Kind of what i had planned before but all changed now with plumbing it.. I will still keep that fan on the back though..
So my plan is to get a stand built to hold a chiller in the lower half of the stand and the 10g sump refugium on top
Kind of what i have planned out for this tank (sorry about my hand writing or my poor drawing skills)
The inspiration for this build:
http://www.nano-reef.com/topic/296235-3-foot-office-nano-mr-aqua-12-gallon-long/