60g db edge build need equipment advice

Status
Not open for further replies.

RicoReef

Member
So am starting a new build am going with a 60g dee blue edge and marinland stand and thinking of doing a eshopps cube sump and 2 ai primes or i already have one or should i go with an ai hydra 26 any advice on equipment should i change anything? something haven't bought anything yet am planning for this week

Sent from my LG-H631 using Tapatalk
 
Is this tank the 36x18x21? The prime isn't to great at penetrating deeper than 16". I'd go with two primes and t5 supplements or two 26 hd's.
 
Is this tank the 36x18x21? The prime isn't to great at penetrating deeper than 16". I'd go with two primes and t5 supplements or two 26 hd's.
Hey jsanches its 24×24×24 i was hoping 2 primes i really like these lights

Sent from my LG-H631 using Tapatalk
 
I have a black stand for a 60 cube that I can let go for cheap. It could use some touching up few knicks here and there but structurally it's good. If you are interested in it just shoot me an offer for it. Like that you can save a little money since the stands are pretty pricey.




 
Oh if it's o ly 24x24 then yeah the primes would work well or just the one 26 will do. The prime can only handle 18x18 and then it starts to get poorly light on the ends of the tank. With the 26 it won't be nearly as bad and a great place to keep LPS corals.
 
I have a black stand for a 60 cube that I can let go for cheap. It could use some touching up few knicks here and there but structurally it's good. If you are interested in it just shoot me an offer for it. Like that you can save a little money since the stands are pretty pricey.




Hello thanks peter i will let you know am trying to figure out the sump not shure what to go with and what will fit under the stand

Sent from my LG-H631 using Tapatalk
 
I was going to use this stand but built my own. I'm using a 27g cube as sump/fuge and it fit through the back opening but I wanted more access to it. If you want I can take some measurements of the openings. About lighting you can always do led with t5 combo so like that you have full coverage of the tank.
 
I was going to use this stand but built my own. I'm using a 27g cube as sump/fuge and it fit through the back opening but I wanted more access to it. If you want I can take some measurements of the openings. About lighting you can always do led with t5 combo so like that you have full coverage of the tank.
Ok ill get back to you am going to go check some stand out i was looking for the cherry finish but cant find it anyware

Sent from my LG-H631 using Tapatalk
 
So i did some rethinking and am also thinking about the nuvo fusion 40g any thoughts on that tank ? Ill be running 2 primes

Sent from my LG-H631 using Tapatalk
 
Status
Not open for further replies.
Back
Top