auto shut off not shutting off WTF?

Aquaman

Aquaman

New member
hi guys / and or gals ... I had an auto shut off on my rodi and all was working good .. but I decided to move the reservoir and and clean up the hoses on the rodi now the shut off drain keeps running and im not sure why I double checked and every thing looks right


(EDIT) I unplugged the booster ( thus bypassing it ) and its still doing it ( so the booster is not the problem (no power to the booster the water just flows through it....and it also does it with the booster on too



I have the solenoid set up like this
.




P.S. I HAVE A FLOAT SWITCH INSTALLED IN THE RES TANK ( if it means any thing )


the waste water keeps running until I flip the flush lever
or until I shut off the main water source off

any ideas guys? Does anyone know if anyone makes an electric solenoid that when it senses pressure it shuts off? (that way I can set it up on the line by the float and when the float valve closes the pressure would build up and shut off the electric solenoid connected to the main water in ?
 
I don't think that's the case the solenoid is supposed to shut off the drain (waste) like I said it was working ..but I moved the res tank next to it and cleaned up the rodi ( shortend a few long hoses and zip tied the solenoid)

now its not working right I think it has something to do with pressure but that would mean the solenoid is working in reverse( when there is no pressure when I flip the flush it shuts off) in stead of when it builds up pressure it is supposed to close the solenoid


pics would show the same as the drawing
 
So you didn't unplug any of the wires from the solenoid? Is it possible when you were zip tying the wires you pulled on one too hard? Maybe have some wire touching two terminals?


Mobile browsing
 
You must log in or register to reply here.
Back
Top