Beardown's 90g Rimless Cube Build

Beardown

Member
Finally getting back to it. I have the cube and stand set up, but it's a work in progress. This will be mainly SPS/LPS setup. Here's what I'm working with:

Marineland 90g rimless Cube
Marineland Stock stand
Ecotech Radion XR30W Pro
Eshopps RS-200 Sump
Simplicity 240 DC Skimmer
Apex Classic Gold
Neptune WXM module
2x MP 10s
2x HMX-300S Finnex Titanium Heaters (One for RO/DI water in basement)
Cobalt MJ - 1200
Tunze Osmolator 3155 ATO
BRS Carbon/GFO Reactor w/ Maxijet pump
Jeboa DCS 3000 Return Pump

My plan is to have bucketless waterchanges from my basement, using a 75gpd RO/DI system and obviously plumbing.

I'm welcome to any suggestions, going forward. Pictures to come!
 
I did a 2"1/2 hole in my floor for my pvc's.1"drain, 3/4 for return and 1/2 clear hose straight to sink for water changes.
 
Also..is up to you but..you got a nice sump but I will recomend you at least a 40 breeder sump for extra room if is going to be down the basemant.
 
View attachment 18096

Just a little update. FINALLY getting my RO/DI put in tomorrow, so I should have water in it shortly. Will take pictures of plumbing this weekend.

EDIT: No idea why the picture is flipped 90 degrees...
 
It looks good so far. Is there a difference between that tank and the 93g? I hope you have better luck than I did with that light, I may have to copy your graphs if it works well for you. I'm not saying it isn't a good light, it was just too complex for my simple mind.
 
It looks good so far. Is there a difference between that tank and the 93g? I hope you have better luck than I did with that light, I may have to copy your graphs if it works well for you. I'm not saying it isn't a good light, it was just too complex for my simple mind.

This actually is the 93g cube from marineland. I do have some programming that I gathered from a few fellow hobbyists, however I'm doing most of my programming via Apex classic. I'd be glad to share though.
 
b8616ced4d02c87c202cc8abd6915c9f.jpg


Little pic of the scape


Sent from my iPhone using Tapatalk
 
Back
Top