New 120g stand?

Kamreefer

New member
Bought this stand used yesterday. Looks like it was well taken care of. I wanted to see if you guys think it is ready to setup or needs reinforcement? Also the tip of the inside was not painted? or the back should i paint it or add any support thanks as always! happy reefing
a96567ec035d4202e6e7ce6e77dc582e.jpg
4084c3bd1ddaf287df61a3d4b39f5775.jpg
f7d91185e50fbb92d39e098528299f5f.jpg
31faa1efe1ea53a5ace64019aee1e740.jpg



Sent from my iPhone using Tapatalk Pro


Sent from my iPhone using Tapatalk Pro
 
It was very well built what makes me nervous is those angle supports are a bit flimsy


Sent from my iPhone using Tapatalk Pro
 
The angle supports were not even necessary but since they are there, leave them. I have built stands for 150 gallons and used far less support with no issues or sagging in the middle. The only thing I would have done different is carried the top 2x4 all the way to the outer supports versus stopping it short to the outside of them. That way it would have tied in all the 2x4's together.
 
I'd personally add a 2x4 center brace for piece of mind lol. It's not really needed but piece of mind is priceless!

Sent from my SAMSUNG-SM-G930A using Tapatalk
 
This the inside underneath for a better view of the support.
d1f37d087c05413f5b2be9cde9301adb.jpg

this is underneath the stand

4b3728afde737c3e2666b9f5f92e4467.jpg



Sent from my iPhone using Tapatalk Pro
 
Got bored so i started carving. First time ever right door was first attemp amd the left was the second may have to ditch the right door and repeat the same carving on the right.
4157615e98bc5ff876cc8ddbe67cd147.jpg



Sent from my iPhone using Tapatalk Pro
 
Back
Top