Where to buy Flow Restrictor locally

ninjamyst

Premium member
Where can I buy flow restrictor for my Spectrapure 90 GPD RODI unit? The stupid thing didn't come with a capillary tube so I have been running the unit without any flow restriction. I noticed after my water bill went sky high since I got this new RODI unit.
 
Not sure locally. I know Bulk Reef Supply sells them.
You can try Lowes, since they sell a bunch of RODI filters, but not sure about restrictors.


Sent from my iPhone using Tapatalk
 
Don't run a flow restrictor. Read into them. Run a manual valve off of your waste line and adjust it til you get a 4:1 ratio. Check with your system as your system might not be made to run at a 4:1 ratio.
 
My manual says 3:1 or 4:1 is proper ratio for me. I am getting freaking 8:1 right now and my wife is not happy with the water bill...
 
So why is it better than a flow restrictor? It seems like flow restrictor is the standard for RODI units.

The only reason I know this is because I bought a flow restrictor and it it was wayyyy off. After reading into how to fix the problem I found that a lot of guys use these valves. It's completely adjustable. You can physically test and make sure you are getting the proper ratio and not wasting your filters. Ratios should be checked twice a year during winter and summer since the ratios may change with water temperature.
 
The only reason I know this is because I bought a flow restrictor and it it was wayyyy off. After reading into how to fix the problem I found that a lot of guys use these valves. It's completely adjustable. You can physically test and make sure you are getting the proper ratio and not wasting your filters. Ratios should be checked twice a year during winter and summer since the ratios may change with water temperature.
Metering valve the way to go
 
Don't run a flow restrictor. Read into them. Run a manual valve off of your waste line and adjust it til you get a 4:1 ratio. Check with your system as your system might not be made to run at a 4:1 ratio.

where do you place the flow restrictor?
can you just add it onto the end of your waste line valve?
 
Back
Top