www.glass-holes.com Overflow 700gph kit

Glass-holes.com is a great site - Ive ordered from them before, and about to place another order for more bulkheads
 
So would any of you recommend the 700gph overflow kit on a 40 gallon breeder? Also, how difficult/risky is it to drill the hole? I am pretty handy and confident in doing it just looking for any tips you may have.
 
I've used Glass Holes overflows on my tanks and I like them. I don't think they can be silent. The sound can be dialed down to a gentle, barely audible gurgle if your returns are pumping half of your total drain capacity, or less. I also use a PVC Tee Junction crowned by a threaded cap with a small snorkel tube instead of Glass Holes stock elbow-snorkel tube. This really helps keep the noise down.
 
I have a brand new kit I was going to use but never did if anyone wants it
The overflow is used but in perfect shape the rest is new
It has dual returns

1 Glass Holes 700gph WITH LID (bought used but in perfect shape)
The rest below is all brand new
1 1/2" bulkhead with gasket for overflow
Glass hole saw for overflow bulkhead

Return parts

(2) 1/2" Bulkhead Thread x Thread
(2)1/2 inch elbow with hose barb end
(2)1/2 inch Loc-Line Flexible Pipe, 5 1/2" Long, 6 segments
(2)1/2 inch Loc-Line NPT Connector (Male Adaptor)
(2) flare nozzles
1 1/8" Glass Cutting Hole saw for return bulkheads
New at glass holes it's 145.00 shipped

100.00 and it's yours
BCC32602-40CC-45B2-B4DC-257C906920D5-151-000000023E58F74C.jpg
 
You must log in or register to reply here.
Back
Top